✨ Clean and dry the surface from dirt, grease, oil or water.
✨ Use methlyatedspirits or mechanical drying, do not use soap or detergent.
✨ Cut nozzle an 45° angle to desired bead width, and apply to substrate with sealant gun.
✨ Toddling time: 10 minutes. Tack free time: 1 hour
✨ Surface may need a primer. If so, allow primer to dry before applying the sealant.
✨ Use approved backing material for joints over 10mm deep.
✨ Remove masking tape before sealant has skinned over.